MPS650 Motorhome Parking Sensors

Motorhome Colours*
Please contact a fitter for me*

£100.00 Inc VAT

£83.33 ex. tax
? Tax based on United Kingdom.

MPS650 Motorhome Parking Sensors - Description

This Dolphin Motor home parking sensor kit comes with 6 recess mounting sensors. The high quality of the system means that it will cover the widest of vehicles giving a professional finish.This Motorhome parking sensor kit features longer 6m cables to enable easy installation on to the widest of vehicles. Included with the 6 recess sensors is a digital display to give you a count down in centremeters as you get closes to an obstacle and a graphical bar indication of whether the left or right sensors are closest and audio alerts which beep with increased frequency the closer you get to an obstacle. The display unit on this motor home reversing sensor system is 10m (over 30 feet) and has an adhesive underside to mount on the dashboard or somewhere else suitable.

Kit Contents

  • 6 x 6m Recess Bumper Fit Sensors
  • 1 x Control Unit
  • 1 x 10m Display with Inbuilt Buzzer
  • 1 Cutting Tool FREE!
  • Fitting Accessories
  • Instruction Manual

How it works
The system works by radiating ultrasonic beams covering the area infront of the vehicle. The beams are reflected by obstructions ahead, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.

When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.

200 - 160cm
Safe Mode
150 - 100cm
Safe Mode
90 - 50cm
Alarm Mode
40 - 30cm
Danger Mode
30 - 0cm

NEW "Swap Socket" Feature

All of our kits now come with the new watertight swap socket feature based 6 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problems with faulty sensors or accident damage in the future it facilitates easy replacement without having to remove the bumper again and rewire from scratch.

Optional Wedges
This system comes with optional angled wedges, giving greater flexibility according to the shape of your bumper.  The wedges can be used if your bumper is slightly angled up - or downwards, to ensure the sensor's signal is still sent out parallel with the road's surface. 

Technical Specification

  • Rated voltage (range) DC12V
  • Power 3.6W
  • Detecting Angle H>60, V>60 degreese
  • Detection Distance 0.3~2m
  • Sensor Frequency 315MHz/433MHz
  • Working temperature of control box -20 ~+70
Measurements for Standard Size Sensor
Some Useful Measurement Information
(measurements are approximate and not guaranteed)
Component Dimensions
Size of Display

L100mm x W26mm x H20mm

Size of Processor
L96mm x W68mm x H26mm
Size of Ultrasonic Recess Sensors
Head Width 25mm x
Sensor Depth 22mm
Diameter Size For Drilling
21mm (Drill Bit Supplied)
Length of Sensors Cabling
Length of Cabling for Display

No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. Clean carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the sensors. The sensors can be washed carefully with warm soapy water

Product out of stock

Notify me when product is back in stock

Customer Reviews

No Reviews Posted Yet - be the first!(write review)

Related Products

Recently Viewed Products

Pay with PaypalPay by other
Paypal Card payments via Sage Pay Phone Us