3 Number Plated Mounted Sensors - Audio Alerts

PPS300

£49.99 Inc VAT

£41.66 ex. tax
? Tax based on United Kingdom.

3 Number Plated Mounted Sensors - Audio Alerts - Description

Dolphin PPS300 Number Plate Parking Sensor Kit
The PPS300 parking sensor system is designed for an easy installation where you cannot or do not want to drill a bumper to fit parking sensors in it. Three sensors are neatly mounted into a number plate frame which helps maintain the original look of your vehicle. The sensor in the middle faces directly outwards while the sensors left and right are housed at an angle to give you full coverage of the width of your car or van.

Kit Contents

  • 3 x Sensors
  • 1 x Control Unit
  • 1 x Buzzer
  • 1 x EU Number Plate Frame
  • 1 x Power Lead
  • Instruction Manual
Control Box

How it works
The number plate frame would replace the frame that comes on many European cars as standard or would attach to the car using the current screw holes securing the number plate. Your number plate then clips into the frame. You may then need to make one small hole behind the number plate to feed the three parking sensor cables through to inside the car or depending on your vehicle they could be routed upwards under a boot handle and into the car. As with our standard parking sensor systems the system then simply connects to the reversing light bulb for power so they come on automatically when you select reverse gear. 

The control box has a 3 stage setting to adjust the sensitivity of the sensors depending on what height they have been mounted at allowing you to fit them as low as 35cm or as high as 80cm. The PPS300 comes with a buzzer which you also mount in the boot which gives you audio beeps starting at 1.5m which will increase in frequency as you get closer to an object giving you a constant tone to stop at 30cm. Alternatively the PPS350 also has a display to give you a countdown in addition to the audio alerts.

Stage
Distance
Awareness
Alarm
1
200 - 160cm
Safe Mode
No
2
150 - 100cm
Safe Mode
Bi----Bi----Bi
3
90 - 50cm
Alarm Mode
Bi--Bi--Bi
4
40 - 30cm
Danger Mode
Bi-Bi-B
5
30 - 0cm
Stop
Bi----------

Some Useful Measurement Information
(measurements are approximate and not guaranteed)

Component Length x Width x Depth
Size of Buzzer

59mm x 40mm x 17mm

Length of Cabling for Buzzer
2m
Size of Processor
96mm x 68mm x 26mm
Size of Ultrasonic Recess Sensors
25mm
Size of Number Plate Holder
532mm x 134mm x 28.2mm
Sensors Detection Angle
110 deg



Maintenance
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water

Updating Order Details
Please do not refresh or navigate away from the page!

Customer Reviews

No Reviews Posted Yet - be the first!(write review)

Dolphin RVI Dash Cam

  Facebook twitter Youtube

  Blogger Pinterest Google+

Pay with OFFLINE
Paypal Card payments via Sage Pay Phone Us
Product Added to your Cart
x

-------- OR --------