2 Number Plated Mounted Sensors - Reversing Camera & Monitor

PPS200CM43

£99.95 Inc VAT

£83.29 ex. tax
? Tax based on United Kingdom.

2 Number Plated Mounted Sensors - Reversing Camera & Monitor - Description

Dolphin PPS200CM43 Number Plate Parking Sensor Kit
The PPS200CM43 parking sensor system is designed for an easy installation where you cannot or do not want to drill a bumper to fit parking sensors and or a reversing camera. The two sensors are neatly mounted into each side of the number plate frame. The camera then sits in the middle facing directly outwards. The camera produces a colour image of the rear of your car showing reversing guidelines and an overlay of digital countdown in distance for each of the left and right sensors. The included 4.3" mirror monitor then clips over your current rear-view mirror and works as a reversing mirror in the normal way until you go into reverse gear when a screen appears shining through from underneath the mirror showing what is behind you.

Kit Contents

  • 2 x Sensors
  • 1 x Colour Camera
  • 1 x Mirror Monitor
  • 1 x Buzzer
  • 1 x EU Number Plate Frame
  • 1 x Power Lead
  • Instruction Manual
slanted view of numberplate parking sensors

How it works
The number plate frame replaces the frame that comes on many European cars as standard or it attaches to the car using the current screw holes securing the number plate and your number plate then clips into the frame. You may then need to make one small hole behind the number plate to feed a single cable through to inside the car or depending on your vehicle this could be routed upwards under a boot handle and into the car. As with our standard parking sensor systems the PPS200CM43 then simply connects to the reversing light bulb for power and then is comes on automatically when you select reverse gear. 

There is no separate control box on this kit, all the electronics are built into the number plate frame leaving a single cable routing though into the vehicle that has connector for the supplied buzzer, power and the camera output. The camera has some little locking screws allowing you to adjust the angle of the camera up and down depending on the height you have mounted.close up on parrallel park

Buzzer The PPS200CM43 also comes with a buzzer which you also mount in the boot which gives you audio beeps starting at 1.5m which will increase in frequency as you get closer to an object giving you a constant tone to stop at 30cm.
Stage
Distance
Awareness
Alarm
1
200 - 160cm
Safe Mode
No
2
150 - 100cm
Safe Mode
Bi----Bi----Bi
3
90 - 50cm
Alarm Mode
Bi--Bi--Bi
4
40 - 30cm
Danger Mode
Bi-Bi-B
5
30 - 0cm
Stop
Bi----------

Some Useful Measurement Information
(measurements are approximate and not guaranteed)

Component Length x Width x Depth
Size of Buzzer

59mm x 40mm x 17mm

Length of Cabling for Buzzer
2m
Size of Processor
96mm x 68mm x 26mm
Size of Number Plate Holder
532mm x 134mm x 28.2mm
Sensors Detection Angle 110 deg
Camera Filming Angle
120 deg
Size of Mirror Monitor Unit
290mm x 75mm
Size of Viewing Screen on Mirror Monitor 4.3 ins (diagonal)


Maintenance
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water

Customer Reviews

No Reviews Posted Yet - be the first!(write review)

Related Products

Recently Viewed Products

Pay with PaypalPay by other
Paypal Card payments via Sage Pay Phone Us