DMS465 Micro Rear View Clip or Screw Display

DMS465
MICRO COLOUR*
Please Contact A Fitter For Me*

£70.00 Inc VAT

£58.33 ex. tax
? Tax based on United Kingdom.

DMS465 Micro Rear View Clip or Screw Display - Description

The Dolphin is a 4 recess mounting sensor high quality system that will cover the widest of cars giving a professional finish. Included with the 4 recess sensors is a combined digital display and buzzer which gives audible bleeps with increasing frequency as you get closer to an obstacle and a digital countdown in cm. The display is both inverted ad reflected so it only makes sense when read through your rear view mirror. The display comes in a grey rather than black casing to match the interior of most car roofs. There is an on/off switch for the audio alerts which is built into the back of the display.

Kit Contents

  • 4 Recess Bumper Fit Sensors
  • 1 Control Unit
  • Rear View Display with Buzzer Unit
  • 1 Cutting Tool FREE!
  • 3M Sticky Pad for Brain
  • Instruction Manual

How it works
The system works by radiating ultrasonic beams covering the area behind the vehicle. The beams are reflected by obstructions behind the vehicle, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.

As with the other systems the Dolphin unit is activated when reverse gear is engaged. As the vehicle is reversed. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.

Stage
Distance
Awareness
Alarm
1
200 - 160cm
Safe Mode
No
2
150 - 100cm
Safe Mode
Bi----Bi----Bi
3
90 - 50cm
Alarm Mode
Bi--Bi--Bi
4
40 - 30cm
Danger Mode
Bi-Bi-B
5
30 - 0cm
Stop
Bi----------

 

"Swap Socket" Feature

All of our kits now come with the new watertight swap socket feature based 12 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problems with faulty sensors or accident damage in the future it facilitates easy replacement without having to remove the bumper again and rewire from scratch.

Integrated Moulded Wedges
These sensors have the wedges built in, you need to position the sensors slightly angled up - or downwards, to ensure the sensor's signal is still sent out parallel with the road's surface when placed in your vehicles bumper.
Micro Sensor Measuremants

Technical Specification

  • Rated voltage (range) DC12V
  • Power 3.6W
  • Detecting Angle H>60, V>60 degreese
  • Detection Distance 0.3~2m
  • Sensor Frequency 315MHz/433MHz
  • Working temperature of control box -20 ~+70
Some Useful Measurement Information
(measurements are approximate and not guaranteed)
Component Length x Width x Depth
Size of Display

100mm x 20mm x 26mm

Size of Processor
96mm x 68mm x 26mm
Size of Ultrasonic Recess Sensors
20mm x 20mm
Diameter Size For Drilling
18.2mm (Drill Bit Supplied)
Length of Sensors Cabling
2m
Length of Cabling for Display
5.9m

Maintenance
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. Clean carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the sensors. The sensors can be washed carefully with warm soapy water

Customer Reviews

No Reviews Posted Yet - be the first!(write review)

Related Products

Recently Viewed Products

Pay with PaypalPay by other
Paypal Card payments via Sage Pay Phone Us